Five Major Reasons Affecting The Accuracy Of Pipe Bending Machines

The pipe bending machine is mainly divided into three types: automatic pipe bending machine, CNC pipe bending machine, and hydraulic pipe bending machine. The automatic pipe bending machine is pure electric, driven by a motor, a gearbox, and driven by a gear chain; The hydraulic pipe bending machine decomposes the bending action and uses hydraulic pressure to drive the clamping and unclamping, bending and bending, auxiliary feeding and auxiliary feeding, and core feeding and core withdrawing actions. Today we will talk about the accuracy of fully automatic pipe bending. What factors will affect the accuracy of fully automatic pipe bending?

1. The thickness and roughness of the material

Laser cutting is suitable for cutting thin plates, with effective thicknesses of carbon steel below 12mm and stainless steel below 6mm. The processed quality is significantly enhanced, and efficiency is also guaranteed. If cutting<1mm material, the incision will also be smoother. The surface roughness of materials also determines the quality of cutting. Generally, the smoother the material, the better the quality of the cut.

2. Working power and mode of CNC pipe bending machine

After research, it has been proven that the higher the power, the better the effect even when cutting the same sheet metal. The mode of laser cutting has a certain degree of compatibility with the material, and the higher the effect, the better.

3. Focus position

The focus of the laser cutting machine can be aligned, and the accuracy and precision of the cutting can meet the desired requirements.

4. Cutting speed

In fact, no matter what type of material it is, it can make the cutting speed match the material, so the cutting effect is good at this time. If it is too fast or too slow, it will have an impact on laser cutting.

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less impurities adhered to the material, and the smoother the cutting edge. Generally speaking, the speed of oxygen cutting is faster, the cutting effect of nitrogen is good, and the cost is also low. The cutting effect may vary depending on the gas used.