The Influence Of The Bending Forming Speed Of Hydraulic Pipe Bending Machine On The Forming Quality

To ensure the normal long-term operation of the machine, we need to have good daily maintenance methods and standardized use, and the widely used semi-automatic hydraulic pipe bending machine is no exception. We need to be clear about some precautions for maintenance and pipe bending speed.

During the operation of the semi-automatic hydraulic pipe bending machine, the parts of the pipe bending machine can be maintained under harsh environmental conditions, improper and incorrect operation, as well as overload. The pipe bending machine system is suitable for operation in environments of ± 40 ℃ and 0-95% humidity. The pipe bending machine is suitable for local use at altitudes of 0-3000m. Before working on the pipe bending machine, a suitable workplace should be selected. The site should not only achieve the accumulation of straight pipes and bent pipes, but also ensure that the pressure of the equipment can be accepted on the ground. The bending function is used to inspect the appearance of the anti-corrosion main pipe for oil stains, dents, twists, wrinkles in the anti-corrosion layer, unclear identification of the anti-corrosion number and pipe number, or incorrect writing, mechanical damage, and other visual defects. Inspection records should be kept.

In addition, the main impact of the bending forming speed of the semi-automatic hydraulic pipe bending machine on the forming quality is:

If the speed is too fast, it can easily form a flat and tortuous part of the catheter, but the roundness cannot meet the requirements, resulting in the cracking and breaking of the catheter; If the speed is too slow, it can easily cause wrinkling and slipping of the compression block of the catheter, and large diameter pipes can easily cause sinking of the tortuous part of the catheter. It is advisable to confirm the bending speed of the catheter as 20% -40% of the machine's bending speed.