How to maintain important parts of chamfering machine

The main role of chamfering machine is to chamfering some workpieces. These workpieces include some products produced by molds, which are applied to hardware machinery, machine tools and other fields. And how to maintain the important parts of the chamfer machine? Next, I will share with you. Chamfer hydraulic oil circuit

1. Check the oil level of the chamfering machine liquid tank every week. If the hydraulic system is repaired, it should also be checked. 2. The hydraulic oil used for chamfering machine fluid is ISO H46 or MOBIL DTE25;

3. The oil of the new machine should be changed after 2000 hours of work, and the oil should be changed after every 4000~6000 hours of work. The oil tank should be cleaned every time of oil change. System oil temperature should be between 35C and 60C, not more than 70C, if too high will lead to the deterioration of the oil quality and accessories. Chamfer filter

1. Every time the oil is changed, the filter should be replaced or thoroughly cleaned:

2. Chamfering machine has related alarm or oil quality is not clean and other filter abnormalities, should be replaced 3. The air filter on the chamfering machine liquid tank shall be checked and cleaned every 3 months and replaced every 1 year.

1. Clean the hydraulic parts of the chamfering machine (substrate, valve, motor, pump, tubing, etc.) every month to prevent dirt from entering the system. No cleaner can be used :2. After the new machine is used for a month, check whether there is any deformation in the bending of the tubing. If there is any abnormality, it should be replaced. After two months of use, the connection of all accessories should be tightened.