Computer operation and control methods and steps for fully automatic pipe bending machine

With the widespread application of China's manufacturing industry, such as the basic construction of road and railway lines, furniture and household appliances, and other manufacturing industries. The application technology of the pipe bending machine has been accompanied by the development trend of the period, and it must be applied in the production and manufacturing of automotive silencers. It is an essential part of the automotive industry manufacturing industry. Here, let's first understand how the application computer operates the pipe bending machine and its characteristics.

After changing the bending die, when sorting out the groove of the bending die, it is necessary to point towards the axis of the CNC lathe and move the elbow head horizontally along the slide rail. That's easier than adjusting the slide and lathe tool holder to adjust the CNC lathe axis.

In the computer-controlled pipe bending machine, there is a small car for fitness activities. Due to the installation of negative feedback system software for the main and branch motors in the computer-controlled pipe bending machine, positive torque is saved throughout the entire process of the car's work, simplifying the electrical equipment routes of all machine equipment. Due to the good effect of positive torque on work, computer control has this setting for driving.

When there is a bent part in the computer-controlled pipe bending machine, due to the load on the car, it is pulled forward by the pipeline in order to change the bending. The area where the pipeline is bent, which was originally thick, has become soft. That can reduce the rebound force of the small car, so it adds pushing machinery and equipment. Due to the installation of this pushing device, a lateral torsion force needs to be generated during bending.

In computer control, the elbow arm is connected to the main shaft bearing, and its shaft can be replaced. The clamping mold can also be moved left and right, which makes up the reasonable configuration of the pipe bending machine, improves the compressive strength of the mechanical equipment, and simplifies the route. The shell of a computer-controlled CNC lathe is constructed by electric welding, which is very simple and convenient to use.