Several important points when using the pipe bender

1, water cooler water quality cleaning and maintenance
Be sure to ensure that the various equipment in the pipe bending machine is filled with circulating water, which is a matter of attention. At the same time, when the weekend comes, actively clean the tank and replace the water once, especially for the water that has been injected, so as to inject fresh pure water or distilled water. The choice of circulating water is very important, which directly affects the efficiency of the use of the machine and various consumable accessories and the life of the host, it is recommended that when using the specified water, the temperature of the water must be controlled under constant temperature. Especially in summer, when the water temperature is high, we must find ways to bring the water temperature down. When the water cooler is clear, the power supply of the whole machine should be turned off, and the water pipe of the water outlet should be kept unblocked, so that the water of the laser tube can automatically flow into the water tank, and the power supply should be turned on for 2-3 minutes.
2: Cleaning and maintenance of optical lenses (this must be cleaned every day, and turn off the machine)
In fact, a set of tube bending machine, its optical lens is neither in the console, nor in the water cooler, in fact, it is in the cutting machine tool, but the machine tool of the entire tube bending machine is not all there, is limited to the laser tube and the laser head and the concussion gun, which has a full reflection mirror, half reflection mirror, focusing mirror, etc., in different positions have different functions. These are directly related to the size of the spot, and the accuracy and thickness of the bending machine, so it is necessary to clean the optical lens. These need to be done very carefully, and when wiping, you should use a special laser lens cleaning paper with cleaning liquid to slowly rotate around the middle of the lens to wipe.
3, screw guide rail or linear guide rail maintenance and cleaning (this kind of guide rail, cleaning is more difficult, it is recommended to half a month once a month)
The guide rail is as important to the laser position of the bending machine as the train track is to the train, so the train track has a special person to maintain and repair, then the guide rail on the metal bending machine must also need this aspect of cleaning and maintenance, the guide rail is more complex, basically all the core parts are on the guide rail, and in order to maintain the fluency of the walking position, Often coated with lubricating oil, this lubricating oil is very easy to absorb some solid debris on the top, which affects the flow of the position, so in this respect must be maintained, the use of dry rags or cotton to wipe to bright no dust, and then apply lubricating oil evenly distributed on each guide rail on the OK.
4: Regular inspection of screws and bearings
The screw is in the operation of the bending machine for a period of time, it must be loosened, not only whether you have heard of a horse nail to destroy a country's story, this is not to lose the big, similarly, we can not because of the loosening of a screw, and let the whole machine have an impact, so regularly reinforce the screws one by one, it is very necessary. Especially after the use of the new machine, in the first month, it is necessary to carry out regular reinforcement checks on multi-screw bearings
5, cooling hair dryer maintenance and cleaning
The hot fan is a very important part, including the cooling fan of the console and the cooling fan of the water cooler, which are all more important parts and difficult parts to clean, but the cleaning must be done, because after the long-term use of the cooling fan, there is a lot of dust and debris piled up above, which affects the rotation efficiency of the fan and will produce great noise pollution. It is not conducive to exhaust and heat dissipation kitchen and bathroom. If there is improper heat exhaust smoke, it is necessary to turn off the power in time, and remove the fan, and carry out large-scale cleaning treatment, so as to ensure the efficiency and service life of the machine.